Dry Time:
Typical drying time for walking is 2 hours at 70°F and 50% relative humidity. Typical drying time for a full cure is 24 hours at 70°F and 50% relative humidity. Cooler temperatures or higher relative humidity can extend the drying time
Clean Up:
Clean equipment, tools and surfaces with xylene. Unused or old material may be disposed of in a waste disposal site in accordance with local, state and federal laws.
Precautions/Safety:
Use appropriate safety equipment during application and handling. Please refer to the safety data sheet (SDS) for additional precautionary instructions before use.
Maintenance:
To repair damaged areas, coarse sanding should be followed by thorough cleaning with fresh water. Wear-Tek®4400 may then be reapplied to the clean, dry surface.
Best Performance
- Proper application is the responsibility of the user.
- Make sure the most current versions of technical data sheets and safety data sheets are being used.
- Keep out of reach of children and pets.
- Store in a cool, dry place away from direct sunlight. Avoid opened containers, as moisture will cure the material.
Coverage
300 square feet per gallon. Variations in texture and porosity of substrate will affect the coverage and performance of the product.
