Concrete Cleaner

Freedom from acid

A safe, powerful 100% biodegradable cleaner without any acids, solvents, or VOC's. Formulated to clean, brighten and etch concrete without any harmful effects



16 oz. Sample: $24.88 (samples are not returnable)

1 Gallon Concentrate: $54.88



SKU: N/A Category:


Freedom from acid

A safe, powerful 100% biodegradable cleaner without any acids, solvents, or VOC’s. Formulated to clean, brighten and etch concrete without any harmful effects

Additional information

Weight N/A

What it is

Concrete cleaner & acid free etcher

What it's for

Driveways, patios, garages, warehouses. any soiled concrete or masonry surface or where surface profile is needed.

What it does

Cleans and etches concrete and masonry

What it's made of

Proprietary acid free cleaner


1001 ways to clean concrete

What's the finish/color

Clear, natural

How do you apply it


What's so special about it

Not only does it clean concrete leaving it brighter in appearance but it Requires no neutralizing, has no odor, and is 100% biodegradable.

What else is like it?

Micro-Degreaser 1100: Cleans and degreases concrete
Hydro-Etch 1000: An acid-based cleaner, brightener and etcher


Photos and videos of Ghostshield concrete sealers in action


Technical specs, application instructions, testing data


Eco-Etch 1001 is an ultra safe, concentrated, etching solution that will create an effective profile or etch an interior or exterior concrete substrate without any harmful effects.


  • Feature: Concrete cleaner & acid free etcher
  • Carrier: Water
  • Packaging: 1 Gallon Ultra Concentrate
  • Coverage: Ready to Use: Up to 750 sq. ft. per gallon
  • Reconstitution Ratio:  1 part sealer : up to 2 parts water (distilled water is recommended)
  • Interior/Exterior: Interior/Exterior
  • Application Method: Sprayer
  • Application Temperature: 40ºF - 95ºF
  • Storage/Shelf Life: 1 Year
  • Clean up: Soap/water
  • VOC Content: 0 g/L


Only mix with water. Mix solution slowly in an open-top plastic container. Stir gently. Ratio varies by desired use: for a lighter etch, two (2) parts water to one (1) part Eco-Etch 1001; for a medium etch, one (1) part water to one (1) part Eco-Ecth 1001 and for a heavier etch, full strength.


  1. Always test a small area before application to ensure desired ratio, etch time, coverage rates and to verify application technique.
  2. Before cleaning or etching, make sure the concrete is free of all oil, contaminants, grease, dirt and rust stains (will not clean grease, oil or rust spots.
  3. First wet the substrate with water. Apply using a low-pressure pump sprayer. Allow the solution to sit on the substrate for three (3) to ten (10) minutes. Flush thoroughly with clean water. You do not need to neutralize after using Eco-Etch 1001.


Clean Up

Clean equipment and tools with hot soapy water. Unused or old material may be disposed of in a waste disposal site in accordance with local, state and federal laws.

Best Performance

  • Proper application is the responsibility of the user.
  • Make sure the most current versions of product data sheets and SDS are being used.
  • For professional use only. Keep out of reach of children.


Avoid contact with skin, eyes and clothing, do not take internally. Use appropriate safety equipment during application and handling. Please refer to the safety data sheet (SDS) for additional precautionary instructions before use.

Ghostshield in action

Recent project videos showing how to seal your concrete with Ghostshield


Our latest project in Florida was for the beautiful new Caoba Apartments, part of the new Miami Worldcenter. Ghostshield was the perfect sealer for their high-traffic parking garage.

432 Park Avenue New York

432 Park Avenue - the tallest residential building in the Western Hemisphere - sealed with our flagship commercial product, Iso-Tek 8501; a thixotropic sealer.


View the Micro-Degreaser 1100 a non-acid-based, non-toxic cleaner and the Siloxa-Tek 8510 a deep-penetrating oil and salt repellent sealer in action.