Concrete Cleaner

Degrease it

A safe, powerful 100% biodegradable concrete cleaner and degreaser with no acid, solvents, or VOC's



1 Gallon Concentrate: $64.88



SKU: N/A Category:


Degrease it

A safe, powerful 100% biodegradable concrete cleaner and degreaser with no acid, solvents, or VOC’s

Additional information

Weight N/A

What it is

Concrete cleaner & micro-degreaser

What it's for

Driveways, patios, garages, warehouses, any soiled concrete or masonry surface

What it does

Cleans and degreases concrete and masonry

What it's made of

Proprietary micro-degreaser

Cleaner than imagined

Brighter than the day it was poured

What's the finish/color

Clear, natural

How do you apply it?


What's so special about it

Not only does it clean concrete leaving it brighter in appearance but it lifts dirt, oil, greases, sludge and grime

What else is like it?

Eco-Etch 1001: Cleans, etches and brightens concrete without any acid
Hydro-Etch 1000: An acid-based cleaner, brightener and etcher


Photos and videos of Ghostshield concrete sealers in action


Technical specs, application instructions, testing data

Micro-Degreaser 1100 rises above

Micro-Degreaser 1100 is an ultra safe, concentrated, cleaner and degreasing solution that will remove stains, greases, oils and soils on an interior or exterior concrete substrate without any harmful effects.


  • Feature: Concrete cleaner & degreaser
  • Carrier: Water
  • Packaging: 1 Gallon Ultra Concentrate
  • Coverage: Ready to Use: Up to 750 sq. ft. per gallon
  • Reconstitution Ratio:  1 part sealer : up to 10 parts water (distilled water is recommended)
  • Interior/Exterior: Interior/Exterior
  • Application Method: Sprayer
  • Application Temperature: 40ºF - 95ºF
  • Storage/Shelf Life: 1 Year
  • Clean up: Soap/water
  • VOC Content: 0 g/L


Only mix with water. Mix solution slowly in an open-top plastic container. Stir gently. Ratio varies by desired use: for a light cleaning, ten (10) parts water to one (1) part Micro-Degreaser 1100; for moderate cleaning, four (4) part water to one (1) part Micro-Degreaser 1100 and for heavy cleaning, one (1) part water to one (1) part Micro-Degreaser 1100.


  1. Always test a small area before application to ensure desired ratio, etch time, coverage rates and to verify application technique.
  2. Apply using a low-pressure pump sprayer. Allow the solution to sit on the substrate for two (2) to ten (10) minutes. If necessary agitate with a stiff bristle nylon brush or broom. Flush throughly with clean water. Repeat the process as needed. You do not need to neutralize after using Micro-Degreaser 1100.


Clean Up

Clean equipment and tools with hot soapy water. Unused or old material may be disposed of in a waste disposal site in accordance with local, state and federal laws.

Best Performance

  • Proper application is the responsibility of the user.
  • Make sure the most current versions of product data sheets and SDS are being used.
  • For professional use only. Keep out of reach of children.


Avoid contact with skin, eyes and clothing, do not take internally. Use appropriate safety equipment during application and handling. Please refer to the safety data sheet (SDS) for additional precautionary instructions before use.

Ghostshield in action

Recent project videos showing how to seal your concrete with Ghostshield

Redi-Mix Colors - Micro-Degreaser 1100

Travel with us to Redi-Mix's Taunton plant where we help with a dirt, grime, and grease issue in one of their garage bays. The Micro-Degreaser™ 1100 is perfect for the task - see it in action!

Micro-Degreaser 1100 for ISA Markings

See the powerful cleaning action of the Micro-Degreaser™ 1100 combined with the durability of the Wear-Tek® 4400. Grease, dirt, and grime don't stand a chance against this powerful duo.


View the Micro-Degreaser 1100 a non-acid-based, non-toxic cleaner and the Siloxa-Tek 8510 a deep-penetrating oil and salt repellent sealer in action.