Penetrating Concrete Driveway Sealer - Ghostshield Concrete Sealers

DRIVEWAYS

Concrete driveway sealers

Concrete driveways are best sealed with a concrete sealer once they are poured. However, all of the Ghostshield concrete driveway sealers can be used on new or existing concrete driveways as long as the driveway is free of contaminants and in most cases, previous sealers. If your driveway is in an area that sees snow and ice in the winter, freeze/thaw cycles and excess salt from salted roads can ruin your concrete faster than you would believe. One of the sealers below will help to protect and preserve you concrete driveway for up to ten years.

SILOXA-TEK® 8500

Best used on driveways in climates exposed to winter and freeze-thaw cycles providing protecion against water and deicing salts.

Ghostshield Siloxa-Tek 8500 Concrete Sealer

VIEW SILOXA-TEK 8500

The Siloxa-Tek 8500 is our favorite product to treat nearly any application. This driveway sealer can be used on a variety of substrates including concrete, brick, pavers, stamped concrete and exposed aggregate. The Siloxa-Tek 8500 is a water-based penetrating sealer that leaves a natural finish, meaning it will not change the look or appearance of the concrete.

The 8500 is used to protect driveways from deicing salts and mag chlorides. If concrete is left unsealed it can result in spalling, pitting and cracking. The Siloxa-Tek 8500 is able to resist deicing salt damage and keep concrete strong and waterproof.

Available in a ready to use version, or an ultra concentrated version. The ultra concentrated version is mixed with 4 gallons of distilled water prior to application. Two coats are easily applied wet-on-wet (the second coat is applied immediately after the first coat while the first coat is still wet) with a sprayer, roller or brush.

To increase the strength and performance of the Siloxa-Tek 8500, apply one coat of the Lithi-Tek 4500 five to seven days prior to sealing with the Siloxa-Tek 8500.

SILOXA-TEK® 8510

The Siloxa-Tek 8510 is our highest performing and longest lasting concrete driveway sealer. Best used on concrete driveways to protect against water and resist deicing salts and staining from oils and greases.

VIEW SILOXA-TEK 8510

The Siloxa-Tek 8510 is our flagship concrete sealer and a triple threat when it comes to protecting against water, deicing salts and stain resistance from oils and greases. Because of the small amount of solvent carrier, this high actives penetrating sealer is the deepest penetrating and longest lasting sealer in the Siloxa-Tek line.

Available only in a ready to use version, two coats are easily applied wet-on-wet with a solvent rated sprayer, roller or brush. The concrete retains its natural, flat finish after sealing.

To increase the strength and performance of the Siloxa-Tek 8510, apply one coat of the Lithi-Tek 4500 five to seven days prior to sealing with the Siloxa-Tek 8510.

SILOXA-TEK® 8505

The Siloxa-Tek 8505 is the water-based and low VOC version of the Siloxa-Tek 8510.

Ghostshield Siloxa-Tek 8505 Concrete Sealer

VIEW SILOXA-TEK 8505

We took our favorite all-around, concrete sealer and made it even better. Take all the best attributes of 8500 - resists water intrusion, deicing salts and chlorides and add to it resistance from staining making it an even better choice for driveways. The same stain resistance technology found in the 8510 is also in this water based product, making oil and grease clean up easier. The main difference between the 8510 and the 8505 is that the 8510 uses a solvent as a carrier and the 8505 uses water as a carrier.

To increase the strength and performance of the Siloxa-Tek 8505, apply one coat of the Lithi-Tek 4500 five to seven days prior to sealing with the Siloxa-Tek 8505.

LITHI-TEK® 9500

Best used on concrete driveways that are not exposed to deicing salts or winter climates.

VIEW LITHI-TEK 9500

The Lithi-Tek 9500 is an excellent and cost effective concrete driveway sealer for driveways that will not be exposed to freeze-thaw cycles, winter climates or deicing salts. Only available in an ultra concentrated version, the 9500 is mixed with 4 gallons of distilled water prior to application. Two coats are easily applied wet-on-wet with a sprayer, roller or brush.

CRYLI-TEK® 5505

Best used to enhance driveways with a high gloss, wet look finish.

Ghostshield Cryli-Tek 5505 Concrete Sealer

VIEW CRYLI-TEK 5505

Although routine maintenance and reapplication may be required more frequently that with some of the other concrete driveway sealers, the Cryli-Tek 5505 is best used on decorative concrete driveways to enhance and add a wet look, high gloss finish. Best applied with a shed-less solvent rated roller or brush.